objective

Strengthen the management of equipment to keep the equipment in good condition. Ensure the normal use of the equipment and extend the service life of the equipment. Meet the company's production requirements and improve production efficiency.

Scope of application

Nailing machine

program

Preparation and inspection before startup

Turn on the air source and close it. Check that the standard air pressure is 5.5-7bar. If it is lower than 5bar, the machine cannot be started.

Check whether there are any remaining nails around the nail box, and make sure that the carbon brush cover of the nail head moving motor has been tightened, and the four fixing screws of the thimble cylinder seat have been tightened, otherwise the equipment may be damaged during operation.

operation

The operator should be clear about the automatic working process and dangerous parts of the equipment, the dangerous areas of the machine, including the movable parts and

Surrounding areas, follow-up actions after each action. In case of any abnormality found in the work, it shall be shut down and reported to the group leader in time. The group leader shall fill in the maintenance sheet and notify the equipment maintenance group leader.

The operator must have a detailed understanding of the accessories (including safety, operation, setting, adjustment and maintenance) before taking the post, and do not understand them

Ask the technician. Have a comprehensive understanding of the equipment before going to work.

Refer to accessories for setting and adjustment of each nail machine: setting and adjustment of the machine.

东莞市安泽自动化设备有限公司位于广东省东莞市，成立于2005年。公司具有强大的研发实力，产品的软件，电气及机械结构均自行研发设计。公司持有多项国家专利。主营：高速下料机、数码冲孔机 | 数码冲孔机厂家 | 数码打钉机，适用于鞋面、包包、手袋、汽车内饰等皮革冲孔。

联系电话：18122814012（微信同步）

网站：http://www.dganze.com